Oyena Mvelisi weNdibano yePCB – PCBFuture

Yintoni umvelisi wendibano yePCB?

Umvelisi wendibano yePCB luhlobo lomenzi olugxile kwindibano yePCB.Baziingcali ngakumbi kwindibano yePCB kunabanye abavelisi.Kwaye amacandelo abawasebenzisayo athengwa ngokubanzi kwii-arhente eziqhelekileyo.Abantu abaninzi bazama ukufumana umenzi wendibano yePCB ngoku.

PCBFuturengumenzi wendibano yePCB yobungcali.Umzi-mveliso wethu ngumsebenzi ophezulu kunye namava okwenziwa kwePCB kunye neeNkonzo zeNdibano zePCB eTshayina.Singanikezela ngenkonzo ye-turnkey ukusuka kwimveliso ye-PCB ukuya kwi-PCB yokudibanisa, uvavanyo kunye nezindlu.

PCB assembly manufacturer-8

Yintoni enokubonelela ngayo umenzi wendibano yePCB?

  • Indibano yePCB yeTurnkey:

Ukwenziwa kwePCB, indibano yePCB, ukukhangela amacandelo, iimvavanyo kunye nemilinganiselo, ukuPakisha, ukuhanjiswa, ukuleyibhile, isiqinisekiso

  • Pin through-hole Assembly:

Ubungakanani bokubeka i-tape kunye ne-tape rolls.Obona bukhulu besayizi ye-PCB yi-40" x 40".Isantya sokubekwa sifikelela kwiingcezu ze-15,000 ngeyure, kwaye ukuchaneka kufikelela kwi-99%, okunciphisa ilahleko yecandelo.

  • ITekhnoloji yoMphezulu weMount:

PCBFuture zonke iimveliso zihambelana ne-IPC2 okanye imigangatho ephezulu.Ngeminyaka eyi-18 yamava ekubekeni i-BGA, i-UBGA, i-CSP kunye neepassives zeprofayili ezincinci ukuya kuthi ga kwi-0201, sinika isisombululo esinexabiso eliphezulu, isivuno esiphezulu kuzo naziphi na iimfuno ze-SMT.

  • Ulawulo oluzenzekelayo lwe-AOI :

a.Ijonga intlama yesolder

b.Ijonga izinto ukuya kuthi ga ku-0201"

c.Ukukhangela amacandelo angekhoyo, i-offsets, iindawo ezingachanekanga, i-polarity

  • Ukuhlolwa kweX-Ray:

a.Ii-BGAs

b.IiBGA ezincinci

c.Iiphakheji zesikali seChip

d.Iibhodi ezingenanto

  • Ukunyuswa kwamaza okunyula:

Ngomatshini we-electronic wave soldering machine, i-PCBFuture ifezekisa umgangatho ohambelanayo kunye nolawulo lwenkqubo xa kuhlanganiswa iibhodi zesekethe zinemigangatho emininzi yomhlaba kunye namandla, izihlanganisi eziphezulu zangoku, okanye uhlobo lwe-A-uhlobo lwamacandelo aqhelekileyo.Zonke ii-AOIs zivavanywa phambi kwe-QC.IPQC.

  • Uvavanyo lomsebenzi we-IC-T okanye FC-T

  • Khokela i-solder yasimahla

  • INdibano yeCable

  • Indibano Yokwakhiwa Kwebhokisi

  • Ukuveliswa kwePCB

  • Ukufumana izixhobo

PCB assembly manufacturer-6

Indlela yokukhetha umenzi wendibano yePCB ethembekileyo?

Kukho ezininziPCB Fabrication kunye neNdibanoabavelisi emarikeni, kodwa kubalulekile ukwenza umsebenzi wasekhaya ngaphambi kokuba ukhethe omnye.Kufuneka uqinisekise ukuba banokubonelela ngeemveliso okanye iinkonzo ozifunayo.Kuya kufuneka sinxibelelane nabo malunga neemveliso zakho ze-elektroniki kwangaphambili kwaye sibazi kangangoko unako.Yeyiphi imiba ephambili yokukhetha enye?

1. Zinjani iindleko zokuhlanganisa

Kufuneka siqinisekise ukuba iindleko zikwibhajethi, emva koko silinganise ezinye izinto ukuze wazi ukuba usebenza nabani.Kuya kufuneka uthenge ngeenxa zonke ukuze ufumane iprofayile yexabiso elungileyo, kodwa ixabiso alisoloko lisisigqibo kuba kuhlala kunzima ukufikelela kwixabiso eliphantsi kunye nomgangatho ophezulu.Ngoko ke, kuya kufuneka silinganise ixabiso kunye nomgangatho, mhlawumbi umsebenzi ovela kwiprototype ukujonga umgangatho kunye nenkonzo lukhetho oluhle.

2.Ixesha elingakanani ixesha lokuhambisa

Ixesha lonikezelo labavelisi abahlukeneyo linokwahluka kakhulu, kodwa ixesha lokuthengisa eliqhelekileyo labenzi abaninzi bendibano yePCB malunga neeveki ezi-3-5 zendibano yePCB ye-turnkey.Kwinkonzo yabemi bePCB kufuneka kuphela malunga neentsuku ezi-3-8.Ngoko ke, kufuneka uqinisekise ukuba i-PCB oyi-odole ingafika xa ifuneka, umenzi wendibano ye-PCB unokuhlangabezana neemfuno ezikhawulezayo nezisebenzayo zoyilo lwakho, kwaye i-PCB inokuhlanganiswa kwaye ivavanywe apho kuyimfuneko.Kufuneka uqhagamshelane nabo nangaliphi na ixesha kwaye uthathe inxaxheba kuyo yonke inkqubo yokwenza PCB, nto leyo enokukwenza ucwangcise inyathelo lakho elilandelayo ngokukhawuleza.

3.Ukuba Bafumana amacandelo oqobo ePCB

Abanye abavelisi bendibano ye-PCB bangumgca wendibano enye kuphela, banokuthi bagcine iindleko kwaye banciphise iikona ngokusebenzisa amacandelo angekho mgangathweni weqela lesithathu kwinkqubo yokuhlanganisa.Ke ukuba ujongene nabavelisi, qiniseka ukuba unombono ocacileyo wokuba bawathenga phi amacandelo abo.PCBFuture uthenge onke amacandelo ngowona mgangatho uphezulu, kwaye ngenxa yobukhulu bethu, siyakwazi ukuqinisekisa ukuba ixabiso ligcinwe lisezantsi kangangoko, kwaye ke kudlule nakuphi na ukonga kubathengi bethu.

4. Njani ngomgangatho kubo

Umgangatho ngundoqo ekukhetheni umenzi wendibano ye-PCB ethembekileyo, sifuna iqabane elinobuchule ukuze lisinike inkonzo ekumgangatho ophezulu we-PCB enexabiso elikhuphisanayo kunye nexesha lokuhanjiswa ngokukhawuleza.Umzi-mveliso we-SMT wobuchwephesha we-PCBFuture unezixhobo eziphucukileyo, ezifana noshicilelo lwestencil olukumgangatho wehlabathi, ukuchongwa kwetshiphu ye-SMT kunye nokubekwa kwayo, ukuqukuqela kwakhona kwe-solder, uvavanyo lwe-intanethi kunye nokuveliswa kwemesh yentsimbi.Uvavanyo lwe-AOI kunye noomatshini bovavanyo lweX-reyi ukuze bahlolwe umgangatho.

Kubalulekile ekusebenzeni okuthembekileyo nokusebenzayo kwamacandelo akho e-elektroniki, singasathethi ke ngempumelelo iyonke yemisebenzi yakho yokuvelisa.Kanye njengebhodi yakho yesekethe eprintiweyo, awunakuncama nantoni na ngokwemigangatho.Xa ukhetha i-PCBFuture njenge-PCB yokwenziwa kunye nomthengisi wendibano, uya kufumana inkampani eneminyaka eli-10 ubudala ukubonelela ngezisombululo ezikumgangatho ophezulu wePCB kubathengi behlabathi.Sibeka umgangatho kuwo onke amanqanaba okusebenza kwethu (kubandakanya ukwenziwa kwePCB kunye nokuhlanganisa) yeyona nto iphambili.

PCB assembly manufacturer-7
PCB assembly manufacturer-5
PCB assembly manufacturer-2

Kutheni ukhetha i-PCBFuture yokwenza i-PCB yakho kunye nomyalelo wendibano?

1.Iifektri ezizezakho ngokwenene.

2.Izixhobo ezithembekileyo, kuphela ezivela kubanikezeli becandelo abagunyazisiweyo, umzekelo, i-Arrow, i-elektroniki ye-future, i-Digi-key, i-Mouser...

I-3.Iqabane le-PCB elithembekileyo, i-10 iminyaka ye-PCB yentsebenziswano, i-SGS...

4.Inkqubo yeNdibano esemgangathweni ethembekileyo.

Inkonzo ye-5.One-stop, ukuveliswa kwePCB, indibano yePCB, ukukhangela icandelo...

I-6.PCBFuture ixhasa iinjineli ukuba zidibanise iprototype yazo ye-elektroniki ngokukhawuleza nangeendleko ezifanelekileyo ngexesha lenkqubo yokuqinisekiswa koyilo lonke.

7. Ukubonelela ngeqela lenkxaso elinolwazi ngefowuni kunye ne-imeyile.

8. Ukuhlolwa kwe-DFM yasimahla ziinjineli eziqeqeshiweyo.

9. IMigangatho yoMgangatho eqinisekisiweyo

10. Gcina ixesha kwaye uphucule ukusebenza kakuhle

 I-PCBFuture ibonelela ngazo zonke iinkonzo zendibano ye-PCB ebandakanyayo, kubandakanywa ukwenziwa kwe-PCB, ukufunwa kwecandelo kunye nendibano ye-PCB.Inkonzo yethu ye-Turnkey PCB iphelisa imfuno yakho yokulawula ababoneleli abaninzi ngamaxesha ahlukeneyo, okukhokelela ekonyukeni kobuchule kunye nokusebenza kweendleko.Njengenkampani ephakathi, siphendula ngokupheleleyo kwiimfuno zabathengi, kwaye sinokubonelela ngeenkonzo ngexesha kunye nezomntu ngamnye ukuba iinkampani ezinkulu azikwazi ukuxelisa.Ukwaneliseka kwethu okugqwesileyo kwabathengi bubungqina bomvakalelo wethu onzulu.

Njengophawu oluphambili lwe-PCB, i-PCBFuture iya kuthwala uxanduva olukhulu lwentlalo kunye nobuthunywa bokusebenza, ithathe inxaxheba ngokupheleleyo kukhuphiswano lwamazwe ngamazwe, kwaye izabalazele ukuba ngumenzi wendibano ye-PCB ekumgangatho wehlabathi.

Ukuba unayo nayiphi na imibuzo, nceda uqhagamshelanesales@pcbfuture.comngokukhululekileyo, siya kukuphendula ngokukhawuleza.

I-FQA:

1.Ingaba kukho nawuphi na umda kumlinganiselo ophantsi womyalelo we-PCB yeNdibano yomyalelo?

PCB yethu imveliso odolo ubungakanani 1 isiqwenga kwakhona efanayo PCB umyalelo weNdibano.Kodwa ngokuqhelekileyo i-1 piece order ayiyi kuba neendleko ezifanelekileyo xa kuthelekiswa neebhodi ezininzi xa uodola.

2.Kwiintsuku ezimbalwa ezidlulileyo, ndacela ucaphulo lwendibano yePCB, kodwa andizange ndifumane imeyile.Ndingenza ntoni?

sihlala sidinga iintsuku ezi-1 ukuya kwezi-2 zokujonga iprojekthi yendibano.Ukuba ubungakanani obukhulu bufunekayo, ixesha elongezelelweyo liya kufuneka.Xa ulungile, siya kuthumela ikowuti kwi-imeyile yakho kwibhokisi.Okokuqala, nceda ujonge ii-imeyile zakho ze-imeyile kunye neefolda ezingafunekiyo ukuze ubone ukuba kukho naziphi na ii-imeyile esizithumeleyo.Ukuba awukwazi ukufumana i-imeyile, nceda uqhagamshelane sales@pcbfuture.com uncedo.

3. Ngaba ubonelela ngokuhlolwa kwenqaku lokuqala kwindibano yePCB?

Ewe.Singathumela umfanekiso webhodi okanye siyithumele kwiofisi yakho ukuze ihlolwe.Emva kokuqinisekiswa, siya kuqhubeka nokuhlanganisa ibhodi yakho yesekethe.Xa kugqityiwe, zonke iibhodi zeesekethe ziya kuhanjiswa kuwe.Ngokuqhelekileyo, indlela yokuhlola yokuhanjiswa iya kuba yindleko kwaye ixesha lokuhambisa liya kuba lide.

4. Ngaba unokuqinisekisa umgangatho wamacandelo?

Ngeminyaka yamava kushishino, siye saseka icandelo elithembekileyo umjelo wokuthenga.Onke amacandelo athengwa kwiiarhente ezaziwayo-kakuhle.Ukongeza, sinesebe lokulawula umgangatho ojongene nokuhlolwa kwamacandelo.

5. Liliphi ixesha elilindelekileyo lokuhanjiswa kwe-odolo ye-PCBA?

Ixesha lethu lokuhambisa eliqhelekileyo le-PCB ye-oda yendibano malunga neeveki ezi-3-4.Ukwenziwa kwePCB, ukuthengwa kwecandelo kunye nokudibanisa kuya kugqitywa ngexesha lokuziswa.

6. Kufuneka nditshintshe i-BOM ye-assembly order yam.Ndingenza ntoni?

Nceda uthumele iBOM yokugqibelasales@pcbfuture.comokanye umphathi wentengiso onxibelelana naye.Okuseleyo sizokubamba.

7. Ngaba i-PCBFuture ingabonelela ngokuPheleleyo ngenkonzo yeNdibano yePCB ye-turnkey?

Ewe, sinokubonelela ngenkonzo yeNdibano ye-PCB ye-turnkey kubandakanya imveliso ye-PCB, ukufunyanwa kwezixhobo, iNdibano ye-PCB, uVavanyo, ukuPakisha.

8. Ngaba i-PCBFuture inomatshini we-X-Ray ukujonga umgangatho wokuthengisela i-BGA?

Ewe, ngesiqhelo kuyo yonke iBGA iya kuba nenkqubo yokuhlolwa ngeX-Ray.

9. Ngaba i-PCBFuture inokwenza ngendibano ye-RoHS.

Inkqubo yethu yeNdibano zonke zineemfuno ze-RoHS.